Performance and environmental specifications for SimCraft motion simulation technology
Our motion simulation architecture is designed with exceptional versatility, particularly when it comes to range of motion. The specifications listed below represent standard configurations, but they are not limitations. Thanks to our foundational design, extending the range of motion is as simple as incorporating longer actuators into the system, while reducing motion can be just as easily achieved with shorter actuators. We offer a standard spec optimized for a wide range of use cases, as well as a NASCAR-compliant spec that meets all regulatory requirements. Should your application require additional range of motion, we can often accommodate those needs with tailored configurations.
50° (+/- 25°)
Longitudinal
60 °/s
2400 °/s²
25° (+/- 12.5°)
Lateral
60 °/s
2400 °/s²
40° (+/- 20°)
Vertical
60 °/s
2400 °/s²
8″ (+/- 100mm)
Longitudinal
0.67 f/s (.204 m/s)
26.8 f/s² (8.19 m/s²)
2″ (+/- 25mm)
Lateral
0.67 f/s (.204 m/s)
26.8 f/s² (8.19 m/s²)
2″ (+/- 25mm)
Vertical
1.5 f/s (.48 m/s)
60 f/s² (18.29 m/s²)
25° (+/- 12.5°)
Longitudinal
60 °/s
2400 °/s²
25° (+/- 12.5°)
Lateral
60 °/s
2400 °/s²
25° (+/- 12.5°)
Vertical
60 °/s
2400 °/s²
100mm (+/- 50mm)
Longitudinal
0.67 f/s (.204 m/s)
26.8 f/s² (8.19 m/s²)
25mm (+/- 12.5mm)
Lateral
0.67 f/s (.204 m/s)
26.8 f/s² (8.19 m/s²)
25mm (+/- 12.5mm)
Vertical
.98 f/s (.3 m/s)
60 f/s² (18.29 m/s²)
Total system power requirements vary by model and component spec.
©2024 SimCraft, All rights reserved.
SimCraft’s trademarks and proprietary technology featured on this site are protected by intellectual property laws and may not be reproduced or used without permission.
[rpc:messageQuote1]
[rpc:messageQuote2]
As a valued client, you can enjoy exclusive discounts on all SimCraft Chassis purchases. Fill out the information below to lock in your preferred partner discount permanently and ensure [rpc:firstName] [rpc:lastName] receives credit for the referral. There is no obligation, feel free to look around, and hit the LET’S CONNECT button if you have questions.